Flooré Kit – with panels
Water-based underfloor heating – Complete kit pack for areas up to 24 m2
Flooré Kits come in three sizes: 6 m², 9 m², and 12 m².
If you want to lay underfloor heating over an area of 24 m², you can combine two 12 m² kits. Note that if you have to use more than one kit, you need an Extension kit, which connects the two kits together.
For larger areas we offer free assistance with planning, the amount of material needed and drawings.
Our kits contain: Floor panels, Alu/PEX underfloor heating pipes, Aluminum tape, Pipe fitting.
Select different panel thicknesses: 13 mm – Lowest installation height, 25 mm and 50 mm – Extra insulation
Quick and efficient heating
Lay your new floor on top of the old one!
Save time and money with fewer steps involved
Restricted installation height or room space for extra insulation?
Keep as much of the room height as possible by choosing our ultra-thin panel.
Reduce heat loss by choosing a panel with extra insulation.
Reduce heat loss by choosing a panel with extra insulation.
Flooré Kit Panel 13 mm
Contains:
- Floor panels
- Premium underfloor heating pipes
- Aluminium tape
- Pipe fittings
Our thinnest panel is only 13 mm, resulting in a minimal decrease in room height.
Best suited for:
- Floors that are already insulated
- Floors that do not need insulating
- Rooms in which the floor height increase is to be as small as possible
Flooré Kit Panel 25 mm
Contains:
- Floor panels
- Premium underfloor heating pipes
- Aluminium tape
- Pipe fittings
Best suited for:
- Floors that are not insulated
- Floors where the surface below is not heated
- Homes in which you want to reduce heat loss
- Can be laid directly on an uninsulated concrete floor
Flooré Kit Panel 50 mm
Contains:
- Floor panels
- Premium underfloor heating pipes
- Aluminium tape
- Pipe fittings
Best suited for:
- Floors that are not insulated
- Floors where the surface below is not heated
- Homes in which you want to reduce heat loss
- Can be laid directly on an uninsulated concrete floor
Flooré Kit – Embedded underfloor heating
Perfect for renovation projects
For larger areas we offer free assistance with planning, the amount of material needed and drawings.
Our kits contain: Alu/PEX underfloor heating pipes, Edging tape, Cable ties, Pipe fitting.
Embedded in 20 mm of screed or concrete.
Flooré Kit Embedded
Contains:
- Premium underfloor heating pipes
- Edge insulation
- Cable ties
- Pipe fittings
Our embedded kit is particularly suitable for use when renovating existing rooms. The heating pipes can be embedded in just 20 mm of putty or concrete.
12 mm Premium pipes. c/c distance between the pipes 125–150 mm.