Thin underfloor heating – Water-based underfloor heating with extremely low installation height

This technique is based on using thin panels covered with aluminum foil. The high density and quality of the panels means that surface material can be laid directly on Flooré underfloor heating panels. The Flooré system emits heat more quickly and more efficiently than traditional embedded systems, as there is less distance between the pipes and the floor surface. Watch our video showing you how to easily install underfloor heating.

The Flooré panels are available for both 12 mm and 16 mm heating pipes. The thinnest panels are only 1 mm higher than the pipe, and panels with extra insulation are available with an installation height of 25 mm or 50 mm.

Best of all – the floor level does not need to be raised by more than 13 mm!

Image

About Floor Heating

Flooré skiva 13 mm – för lägsta bygghöjd

Flooré panel 13 mm – for lowest installation height

Ideal for:
  • Floors that are already insulated
  • Floors that do not require insulation
  • Rooms where the floor height increase should be kept as small as possible
Flooré skiva 25 mm – med extra isolering

Flooré panel 25 mm – with extra insulation

Ideal for:
  • Floors that are not insulated
  • Floors where the surface below is not heated
  • Houses where you want to reduce the heat loss
  • Both basements and other floors
Flooré skiva 50 mm – med extra isolering

Flooré panel 50 mm – with extra insulation

Ideal for:
  • Floors that are not insulated
  • Floors where the surface below is not heated
  • Houses where you want to reduce the heat loss
  • Both basements and other floors